Photo of Fred Cannon

Fred Cannon

Professor

Affiliation(s):

  • Civil and Environmental Engineering

225 Sackett Building

fsc1@psu.edu

814-863-8754

Personal or Departmental Website

Research Areas:

Environmental Engineering

Interest Areas:

Environmental engineering

 
 

 

Education

  • BS, University of California, 1977
  • MS, Stanford University, 1978
  • Degree of Advanced Engineer, Environmental Engineering, Stanford University, 1980
  • Ph D, Environmental Engineering, University of Illinois, 1993

Publications

Book, Chapters

  • J. R. Rangel-Mendez and Fred S Cannon, 2005, Remoción de compuestos orgánicos fétidos presentes en agua por medio de adsorción en carbón activado modificado, CYTED, pp. Ch. 8

Parts of Book

  • Fred S Cannon and C. Nieto-Delgado, 2012, Conventional and Tailored Activated Carbons for Removing Natural Organic Matter and Targeted Compounds from Drinking Water, Pan Stanford Publ.
  • R. Parette and Fred S Cannon, 2006, Perchlorate Removal by Modified Activated Carbon, Springer
  • Fred S Cannon, J. E. Goudzwaard, R. W. Peters, J. C. Furness, R. C. Voigt, C. M. Kurtti and J. H. Andrews, 2004, Use of Advanced Oxidation Technology for Emissions & Materials Reduction at Foundries, John Wiley & Sons, Inc.
  • P. D. Paulsen, B. C. Moore and Fred S Cannon, 2001, Applicability of adsorption equations to argon, nitrogen and volatile organic compound adsorption onto activated carbon, pp. 219-229

Journal Articles

  • Fred S Cannon, Hao Sun and Xin He, 2019, "Enhanced trifluoroacetate removal from groundwater by quaternary nitrogen-grafted granular activated carbon", Science of the Total Environment
  • Fred S Cannon, Moses A. Ajemigbitse, Mark S. Klima, James C. Furness, Chris Wunz and Nathaniel R. Warner, 2018, "Raw material recovery from hydraulic fracturing residual solid waste with implications for sustainability and radioactive waste disposal"
  • Fred S Cannon, Leidy Pena, Gary Mitchell, Sridhar Komarneni and Nicole R. Brown, 2018, "The pyrolytic evolution of morphology in biobased coke replacement briquettes: Links between morphology, nanowire characteristics, and performance in cupolas.", 140, pp. pp. 458-464
  • Xiaoyan Sean Zhang, Moses A. Ajemigbitse, Fred S. Cannon, A. E. Hooper, David L. Allara, Paul David Paulsen and James C. Furness, 2018, "Hydrogen Peroxide-Generated Gases at Asphalt-Glass Interface: Effect on Surface Cleaning and Analysis by Nanoscale Surface Imaging Spectroscopy", Environmental Engineering Science, 35, (4)
  • Fred S Cannon, Pin Hou, Zhe Yan, Ye Yuh, Tim Byrne and Cesar Nieto-Delgado, 2018, "Enhancement of perchlorate removal from groundwater by cationic granular activated carbon: Effect of preparation protocol and surface properties.", 201, pp. pp.756-763
  • Fred S Cannon, Siqi Hong, Pin Hou, Tim Byrne and Cesar Nieto-Delgado, 2017, "Adsorptive removal of sulfate from acid mine drainage by polypyrrole modified activated carbons: Effects of polypyrrole deposition protocols and activated carbon source.", 184, pp. pp. 429-437
  • Shang Liu, Tom J. Geeza, Fred S. Cannon, Mark S. Klima, James Pagnotti, James C. Furn andss, , 2017, "Hydroacoustic Cavitation for Recovering Anthracite Fines from Waste Silt-Coal Slurry", Journal of Mining World Express
  • Brandon Barry, Mark S. Klima, Fred S Can andon, , 2017, "Effects of Desliming and Hydroacoustic Cavitation Treatment on the Flotation of Ultrafine Bituminous Coal", International Journal of Coal Preparation and Utilization, 37, pp. pp. 213-224
  • Yang Huang, Fred S Cannon, J S Gao, J. K. Watson, Jonathan P. Math andws, , 2016, "Atomistic Modeling insight into the Structure of Lignite-Based Activated Carbon, and Benzene Sorption Behavior", Royal Society of Chemistry Advances, 6, pp. pp. 56623-56637
  • Zilong Zhou, Fred S Cannon, Cesar Nieto-Delgado and Leidy Pena, 2016, "Lignin/collagen hybrid biomaterials as binder substitute for specialty graphites and electrodes", Carbon, 108, pp. pp. 303-317
  • Maria Isa Zermeno-Montante, Cesar Nieto-Delgado, Fred S Cannon, Colin C. Cash and Christopher C. Wunz, 2016, "Chemical Modeling for Precipitation from Hypersaline Hydrofracturing Brines", 103, pp. pp.233-244
  • Zilong Zhao, Fred S Cannon and Cesar Nieto Delgado, 2016, "Co-pyrolysis characteristics and kinetics of lignin and collagen", Journal of Analytical and Applied Pyrolysis, 120, pp. pp. 501-510
  • Y. D. Noh, Sridhar Komarneni, Fred S Cannon, Nicole R. Brown and H. Katsuki, 2016, "Anthracite briquettes with plant byproducts as an ecofriendly fuel for foundries", Fuel, 175, pp. pp. 210-216
  • Alyona Merkel, Aliya Satayeva, Fred S Cannon, C. Howell, St. Meikle, Kristina Laszlo, V. Inglezakis, J. Jandosov, S. Ray, Z. Mansurov and Sergey Mikhalovsky, 2016, "Characterization of Activated Carbons Obtained from Rice Husk.", Eurasian Chemico-Technological Journal, 18, pp. pp. 1-13
  • Y Huang, Fred S Cannon, J K Watson, B Reznik and J P Mathews, 2015, "Activated Carbon Efficient Atomistic Model Construction that Depicts Experimentally-Determined Characteristics", Carbon, 83, pp. 1-14
  • B Barry, M S Klima and Fred S Cannon, 2015, "Effect of Hydroacoustic Cavitation Treatment on the Spiral Processing of Bituminous Coal", International Journal of Coal Preparation and Utilization, pp. 1-12
  • B Barry, M S Klima and Fred S Cannon, 2015, "Effect of Ultrasonic Cavitation Treatment on Liberation and Hydrocyclone Separation of Bituminous Coal", Mining, Metallurgical, and Petroleum, 32, (3)
  • J T Fox, J F Allen, Fred S Cannon, C C Cash, J A DeVenne, J C Furness, Robert C Voigt, J Lamonski and P Farver, 2015, "Full-Scale Demonstration of a Hybrid Hydrolyzed Collagen-Alkali Silicate Core Binder", International Journal of Metalcasting, 9, (3)
  • R M Torielli, Fred S Cannon, R C Voigt, T J Considine, J C Furness, J T Fox, J E Goudzwaare and H Huang, 2014, "Reining in Costs, Controlling Emissions", Modern Casting, pp. 39-53
  • M J Greenwald, A M Redding and Fred S Cannon, 2014, "A rapid kinetic dye test to predict the adsorption of 2-methylisoborneol onto granular activated carbons and to identify the influence of pore volume distributions", Water Research, pp. 25
  • A M Redding and Fred S Cannon, 2014, "The Role of Mesopores in MTBE Removal with Granular Activated Carbon", Water Research, 56, pp. 214-224
  • C Nieto-Delgado, F S Cannon, P D Paulsen, J C Furness, R C Voigt and J R Pagnotti, 2014, "Bindered anthracite briquettes as fuel alternative to metallurgical coke: Full scale performance in cupola furnaces", Fuel, 1, pp. 39-47
  • T M Byrne, X Gu, P Hou, Fred S Cannon, N R Brown and C Nieto-Delgado, 2014, "Quaternary nitrogen activated carbons for removal of perchlorate with electrochemical regeneration", Carbon, 73, pp. 1-12
  • S Hong, Fred S Cannon, P Hou, T M Byrne and C Nieto-Delgado, 2014, "Sulfate removal from acid mine drainage using polypyrrole-grafted granular activated carbon", Carbon, 73, pp. 51-60
  • T J Considine, F S Cannon, R M Torielli, J C Furness, J T Fox and J E Goudzwaard, 2014, "The environmental Performance and Costs of Innovative Technologies for Ductile Iron Foundry Production", International Journal of Metalcasting, 8, (1), pp. 37-48
  • P Hou, T Byrne, F S Cannon, B P Chaplin, S Hong and C Nieto-Delgado, 2014, "Removal of Sulfate Using Polypyrrole-grafted Granular Activated Carbons with Electrochemical Regeneration", Carbon, 79, pp. 25
  • S Bagherifam, S Komarneni, A Lakzian, A Fotovat, R Khorasani, W Y Huang, J F Ma, S Hong, Fred S Cannon and Y J Wang, 2014, "Highly selective removal of nitrate and perchlorate by organoclay", Applied Clay Science, 95, pp. 126-132
  • M. K. Seliem, S. Komarneni, T. Byrne, Fred S Cannon, M. G. Shahien, A. A. Khalil and I. M. Abd El-Gaid, 2013, "Removal of perchlorate by synthetic organosilicas and organoclay: Kinetics and isotherm studies", Applied Clay Science, 71, pp. 21-26
  • P. Hou, Fred S Cannon, N. R. Brown, T. M. Byrne, X. Gu and C. Nieto Delgado, 2013, "Granular activated carbon anchored with quaternary ammonium/epoxide-forming compunds to enhance perchlorate removal from groundwater", Carbon, 53, pp. 197-207
  • M. K. Seliem, S. Komarneni, T. Byrne, Fred S Cannon, M. G. Shahien, A. A. Khalil and I. M. Abd El-Gaid, 2013, "Removal of nitrate by synthetic organosilicas and organoclay: Kinetics and isotherm studies", Separation and Purification Technology, 110, pp. 181-187
  • P. Hou, Fred S Cannon, C. Nieto-Delgado, N. R. Brown and X. Gu, 2013, "Effect of preparation protocol on anchoring quaternary ammonium/epoxide-forming compound into granular activated carbon for perchlorate adsorption: Response Surface Methodology", Chemical Engineering Journal, 223, pp. 309-317
  • B. G. Diehl, N. R. Brown, C. W. Frantz, M. R. Lumadue and Fred S Cannon, 2013, "Effects of pyrolysis temperature on the chemical composition of refined softwood and hardwood lignins", Carbon, 60, pp. 531-537
  • M. C. Cui, M. Jang, Fred S Cannon, Seungmin Na, Jeehyeong Khim and Jae Kwang Park, 2013, "Removal of dissolved Zn(II) using coal mine drainage sludge: Implications for acidic wastewater treatment", Journal of Environmental Management, 116, pp. 107-112
  • S. Komarneni, A. R. Aref, S. Q. Hong, Y. D. Noh, Fred S Cannon and Y. J. Wang, 2013, "Organoclays of high-charge synthetic clays and alumina pillared natural clays: Perchlorate uptake", Applied Clay Science, 80-81, pp. 340-345
  • J. T. Fox, Fred S Cannon, N. R. Brown, H. Huang and J. C. Furness, 2012, "Comparison of a New, Green Foundry Binder with Conventional Foundry Binders", Journal of Adhesion and Adhesives, 34, pp. 38-45
  • M. R. Lumadue, Fred S Cannon and N. R. Brown, 2012, "Lignin as both fuel and fusing binder in briquetted anthracite fines for foundry coke substitute", Fuel, 97, pp. 869-875
  • W. F. Chen, R. Parette and Fred S Cannon, 2012, "Pilot-Scale Studies of Arsenic Removal with Granular Activated Carbon and Zero-Valent Iron", Environ. Engineering Science, 29, (19), pp. 897-901
  • M. C. Cui, M. Jang, S. H. Cho, J. Khim and Fred S Cannon, 2012, "A continuous pilot-scale system using coal-mine drainage sludge to treat acid mine drainage contaminated with high concentrations of Pb, Zn, and other heavy metals", Journal of Hazardous Materials, 215, pp. 122-128
  • J. P. Patterson, R. Parette, Fred S Cannon, C. Lutes and T. Henderson, 2011, "Competition of anions with Perchlorate for Exchange sites on cationic surfactant-Tailored GAC", Environmental Engineering Science, 28, (4), pp. 249-256
  • H. Huang, J. T. Fox, Fred S Cannon, S. Komarneni, J. Kulik and J. Furness, 2011, "Binding waste anthracite fines with Si-containing materials as an alternative fuel for foundry cupola furnaces", Environmental Science and Technology, 45, pp. 3062-3068
  • Y. J. Wang, Fred S Cannon and X. G. Li, 2011, "A Comparative Analysis of Hazardous Air Pollutant Emissions of Casting Materials Measured in Analytical Pyrolysis and Conventional Metal Pouring Emission Tests", Environmental Science and Technology, 45, (19), pp. 8529-8535
  • M. K. Seliem, S. Komarneni, R. Parette and Fred S Cannon, 2011, "Perchlorate uptake by organosilicas, organo-clay minerals and composites of rice husk with MCM-48", Applied Clay Science, 53, (14), pp. 621-626
  • H. Huang, J. T. Fox, Fred S Cannon and S. Komarneni, 2011, "In-situ growth of silicon carbode nanowires from anthracite surfaces", Ceramics International, pp. 1063-1072
  • J. Y. Kim, S. Komarneni, R. Parette, Fred S Cannon and H. Katsuki, 2011, "Perchlorate uptake by synthetic layered double hydroxides and organo-clay minerals", Applied Clay Science, 51, pp. 158-164
  • M. K. Seliem, S. Komarneni, R. Parette, H. Katsuke, Fred S Cannon, M. G. Shahien, A. A. Khalil and I. M. Abd El-Gaid, 2010, "Composites of MCM-41 silica with rice husk: hydrothermal synthesis, characterization and application for perchlorate separation", Materials Research Innovations, 14, (5), pp. 351-354
  • S. Komarneni, J. Y. Kim, R. Parette and Fred S Cannon, 2010, "As-synthesized MCM-41 silica: new adsorbent for perchlorate", J. Porous Materials, 17, pp. 651-656
  • J. P. Paterson, R. Parette and Fred S Cannon, 2010, "Oxidation of Intermediate Sulfur Species (Thiosulfate) by Free Chlorine to Increase the Bed Life of Tailored GAC to remove Perchlorate", Environmental Engineering Science, 27, (10), pp. 835-843
  • B. C. Moore, Y. J. Wang, Fred S Cannon, D. H. Metz and J. Westrick, 2010, "Relationships between adsorption mechanisms and pore structure for the adsorption of natural organic matter by virgin and reactivated granular activated carbons during water treatment", Environmental Engineering Science, 27, (2), pp. 187-198
  • J. Y. Zou, Fred S Cannon, W. F. Chen and B. A. Dempsey, 2010, "Improved removal of arsenic from groundwater using pre-corroded steel and iron tailored granular activated carbon", Water Science & Technology, 61, (2), pp. 441-453
  • Fred S Cannon, W. F. Chen, R. Parette, B. A. Dempsey, F. L. Sun and J. Y. Zou, 2009, "Method for Oxyanion Removal from Groundwater"
  • H. Huang, Y. J. Wang and Fred S Cannon, 2009, "Pore structure development in in-situ pyrolyzed coals for pollution prevention in iron foundries", Fuel Processing Technology, 90, pp. 1183-1191
  • M. Jang, Fred S Cannon, R. B. Parette, S. J. Yoon and W. F. Chen, 2009, "Combined hydrous ferric oxide and quaternary ammonium surfactant tailoring of granular activated carbon for concurrent arsenate and perchlorate removal", Water Research, 43, (12), pp. 3133-3143
  • A. M. Redding, Fred S Cannon, S. A. Snyder and B. J. Vanderford, 2009, "A QSAR-like analysis of the adsorption of endocrine disrupting compounds, pharmaceuticals, and personal care products on modified activated carbons", Water Research, 43, pp. 3849-3861
  • Y. J. Wang, Fred S Cannon, Magda Salma, Dania A. Fonseca and Scott Giese, 2009, "Characterization of Pyrolysis Products from a Biodiesel Phenolic Urethane Binder", Environ. Sci. Technol., 43, (5), pp. 1559-1564
  • J. T. Fox, Fred S Cannon, R. C. Voigt, J. C. Furness, F. Headington, D. Coan and S. Lewallen, 2009, "Waste Green Sand to Core Sand Reclamation, Demonstration via Casting Study, with Simultaneous Clay Recovery and AO Benefits", American Foundry Society Transactions, 116
  • J. T. Fox, Fred S Cannon, R. C. Voigt, J. C. Furness, J. E. Goudzwaard, M. Wosoba and P. B. Smith, 2009, "Decreased Bond Consumption by Processing Baghouse Dust through Ultrasonic-Cavitation-Settling coupled to Advanced Oxidation", American Foundry Society Transactions, 116
  • M. Jang, W. F. Chen and Fred S Cannon, 2008, "Preloading hydrous ferric oxide into granular activated carbon for arsenic removal", Environmental Science and Technology, 42, pp. 3369-3374
  • W. F. Chen, R. B. Parette, Fred S Cannon and B. A. Dempsey, 2008, "Arsenic Adsorption via Iron-Preloaded Activated Carbon and Zero-valent Iron", Journal American Water Works Assoc., 100, (8), pp. 96-105
  • J. T. Fox, Fred S Cannon, R. C. Voigt, J. C. Furness, P. B. Smith, S. E. Lewallen and J. E. Goudzwaard, 2008, "Simultaneous Sand, Clay and Coal Reclamation using Induced Particle Collision, Discretionary Settling, and Advanced Oxidation", American Foundry Society Transactions, 115
  • Fred S Cannon, K. O. Nowack, D. W. Mazyck, K. M. Goins, B. C. Moore, R. C. Thomas and J. R. R. Mendez, 2007, "Method of heat treating carbonaceous material to enhance its adsorption of taste-and-odor-causing and other organic compounds from water"
  • W. F. Chen, R. Parette, J. Y. Zou, Fred S Cannon and B. A. Dempsey, 2007, "Arsenic removal by iron-modified activated carbon", Water Research, 41, pp. 1851-1858
  • N. Milan-Segovia, Y. J. Wang, R. C. Voigt, Fred S Cannon and J. C. Furness, 2007, "Comparison of OH* Generation for Advanced Oxidation Combinations Applied to Foundries", Ozone Sci & Engr., 29, (6), pp. 461-471
  • Y. J. Wang, H. Huang, Fred S Cannon, R. C. Voigt, S. Komarneni and J. C. Furness, 2007, "Evaluation of Volatile Hydrocarbon Emission Characteristics of Carbonaceous Additives in Green Sand Foundries", Environ. Sci. Technol., 41, pp. 2957-2963
  • Y. J. Wang, Fred S Cannon, M. Salama, J. Goudzwaard and J. C. Furness, 2007, "Characterization of hydrocarbon emissions from green sand foundry core binders by analytical pyrolysis", Envir Sci Tech., 41, pp. 7922-7927
  • S. A. Snyder, S. A. Adham, A. M. Redding, J. DeCarolis, Fred S Cannon, J. Oppenheimer, E. C. Wert and Y. M. Yoon, 2006, "Role of Membranes and Activated Carbon in the Removal of Endocrine Disruptors and Pharmaceuticals", Desalination, 202, pp. 156-181
  • Y. J. Wang, Fred S Cannon, R. C. Voigt, S. Komarneni and J. C. Furness, 2006, "Effects of Advanced Oxid. on Green Sand Properties via Iron Casting in Greensand Molds", Env. Sci. Tech., 40, pp. 3095-3101
  • W. Chen and Fred S Cannon, 2005, "Thermal reactivation of ammonia-tailored granular activated carbon exhausted with perchlorate", Carbon, 43, pp. 2742-2749
  • R. Parette and Fred S Cannon, 2005, "The removal of perchlorate from groundwater by activated carbon tailored with cationic surfactants", Water Research, 39, pp. 4020-4028
  • R. Parette, Fred S Cannon and K. Weeks, 2005, "Removing low ppb level perchlorate, RDX, and HMX from groundwater with CTAC-pre-loaded activated carbon", Water Research, 39, pp. 4683-4692
  • Y. J. Wang, Fred S Cannon, S. Komarneni, R. C. Voigt and J. C. Furness, 2005, "Mechanisms of advanced oxidation processing on bentonite consumption reduction in foundry", Environ. Sci. Technol., 39, pp. 7712-7718
  • J. R. Rangel-Mendez and Fred S Cannon, 2005, "Improved activated carbon by thermal treatment in methane and steam: Physicochemical influences on MIB sorption capacity", Carbon, 43, (3), pp. 467-479
  • D. W. Mazyck, Fred S Cannon, M. T. Bach and L. R. Radovic, 2005, "The role of Calcium in high pH excursions for reactivated GAC", Carbon, 43, (3), pp. 511-518
  • W. F. Chen, J. R. Rangel-Mendez and Fred S Cannon, 2005, "NH3 thermally tailored granular activated carbon: II: Perchlorate adsorption", Carbon, 43, (3), pp. 581-590
  • Fred S Cannon, 2005, "NH3 thermally tailored granular activated carbon: I: Characterization of NH3 thermally tailored GACs", Carbon, 43, (3), pp. 573-580
  • Y. Wang, Fred S Cannon, D. Neill, K. Crawford, R. X. Voigt, J. C. Furness and C. R. Glowacki, 2004, "Effects of Advanced Oxidation Treatment on Green Sand Properties and Emissions", Am. Foundry Society Trans.
  • J. D. Land, Fred S Cannon, R. C. Voigt and J. Goudzwaard, 2004, "Perspectives on Foundry Air Emissions: A Statistical Analysis Approach", American Foundry Society Trans., 111
  • K. O. Nowack, Fred S Cannon and D. W. Mazyck, 2004, "Enhancing Activated Carbon Adsorption of 2-methylisoborneol: Methane and Steam Treatments", Environmental Science & Technol., 38, pp. 276-284
  • J. S. Dusenbury and Fred S Cannon, 2004, "Effect of Advanced Oxidants Generated via Ultra-Violet Light on a Sequentially Loaded and Regenerated Granular Activated Carbon Biofilter", Air and Waste Manage, 54, pp. 871-889
  • D. H. Metz, J. DeMarco, R. Pohlman, Fred S Cannon and B. C. Moore, 2004, "Effect of Multiple GAC Reactivations on Disinfection Byproduct Precursor Removal", AQUA
  • C. R. Glowacki, G. R. Crandell, Fred S Cannon, R. C. Voigt, J. K. Clobes, J. C. Furness, B. A. McComb and S. M. Knight, 2004, "Emissions Studies at a Test Foundry using an Advanced Oxidation-Clear Water System", American Foundry Society Transacitons, 03-152, pp. 20
  • J. E. Goudzwaard, C. M. Kurtti, J. H. Andrews, Fred S Cannon, R. C. Voigt, J. E. Firebaugh, J. C. Furness and D. L. Sipple, 2004, "Foundry Emissions Effects with an Advanced Oxidation Blackwater System", American Foundry Society Transactions, 03-079, pp. 20
  • B. C. Moore, Fred S Cannon, D. H. Metz and J. DeMarco, 2003, "GAC Pore structure in Cincinnati during Full-Scale Treatment/Reactivation", J. Amer. Water Works Assoc., 95, (2), pp. 103-112
  • S. W. Frazier, K. O. Nowack, K. M. Goins, Fred S Cannon, L. A. Kaplan and P. G. Hatcher, 2003, "Characterization of organic matter from natural waters using tetramethylammonium hydroxide thermochemolysis GC-MS", J. Anal. Appl. Pyrolysis, 70, pp. 99-128
  • D. W. Mazyck and Fred S Cannon, 2002, "Overcoming calcium catalysis during the thermal reactivation of granular activated carbon: Part II. Variation of steam-curing reactivation parameters", Carbon, 40, (3), pp. 241-252
  • J. D. Land, R. C. Voigt, Fred S Cannon, J. C. Furness, J. Goudzwaard and H. Luebben, 2002, "Performance and Control of a Green Sand System During the Installation and Operation of an Advanced Oxidation System", American Foundry Society Transactions, 110, pp. 705-715
  • X. Y. Zhang and Fred S Cannon, 2002, "Hydrogen Peroxide Cleaning of Asphalt from Surfaces: The Accelerating Rate Calorimetry (ARCTM) Study: The Effect of Silica Gel and Solution pH on Hydrogen Peroxide Decomposition", Jour. Advanced Oxidation Technologies, 5, (2), pp. 198-210
  • C. Z. Na, Fred S Cannon and B. Hagerup, 2002, "Perchlorate Removal via Iron-Preloaded Granular Activated Carbon and Borohydride Regeneration", JAWWA, 94, (11), pp. 90-102
  • B. C. Moore, Fred S Cannon, J. A. Westrick, D. H. Metz, C. A. Shrive, J. DeMarco and D. J. Hartman, 2001, "Changes in GAC pore structure during full-scale water treatment at Cincinnati: A comparison between virgin and thermally reactivated GAC", Carbon, 39, (6), pp. 789-807
  • Fred S Cannon and T. Y. Yeh, 2001, "Copper Removal to PPB Residuals via Iron Coagulants and Biosolids StorageConditioning", ASCE Environmental Eng. Div., 127, (8), pp. 712-723
  • H. T. Frederick, Fred S Cannon and B. A. Dempsey, 2001, "Calcium and TOC Loading: Effect of Hydroxyl and Carboxyl Substituents", Colloids and Surfaces A: Phys. and Engr. Asp., 191, pp. 161-177
  • H. T. Frederick and Fred S Cannon, 2001, "Calcium-NOM Loading onto GAC", Journal American Water Works Assoc., 93, (12), pp. 77-89
  • H. T. Frederick, Fred S Cannon and B. A. Dempsey, 2001, "Calcium loading onto granular activated carbon with salicylate or phthalate onto GAC", Colloids and Surfaces A: Phys. and Engr. Asp, 177, (2-3), pp. 157-168
  • D. A. Neill, Fred S Cannon, R. C. Voigt, J. C. Furness and R. Bigge, 2001, "Effects of Advanced Oxidants on Green Sand System Performance in a Black Water System", American Foundry Society Transactions, 109, pp. 937-955
  • J. Andrews, R. Bigge, Fred S Cannon, G. R. Crandell, J. C. Furness, M. Redmann and R. C. Voigt, 2000, "Advanced Oxidants Offer Opportunities to Improve Mold Properties, Emissions", Modern Casting, pp. 40, 43
  • D. W. Mazyck and Fred S Cannon, 2000, "Overcoming Calcium Catalysis during thermal reactivation of granular activated carbon. Part I: Steam curing plus ramped-temperature N2 treatment", Carbon, 38, (13), pp. 1785-1799
  • K. Nowack, Fred S Cannon and H. Arora, 1999, "Ferric Chloride Plus GAC for Removing TOC", Journal American Water Works Association, 91, (2), pp. 65-74
  • X. Y. Zhang and Fred S Cannon, 1999, "Hydrogen Peroxide Cleaning of Asphalt from Surfaces: Effect of Temperature", Jour. Advanced Oxidation Technologies, 4, (4), pp. 434-446
  • P. D. Paulsen and Fred S Cannon, 1999, "Polytherm Model for Methylisobutylketone Adsorption onto Coconut-Based Granular Activated Carbon", Carbon, 37, (2), pp. 249-260
  • P. D. Paulsen, B. C. Moore and Fred S Cannon, 1999, "Applicability of adsorption equations to argon, nitrogen and volatile organic compound adsorption onto activated carbon", Carbon, 37, (11), pp. 1843-1853
  • M. W. McCormick and Fred S Cannon, 1999, "Copper Removal Using Biometric/Selectors in Activated Sludge treatment", ASCE Environmental Engineering Division, 12, (5), pp. 470-478
  • Fred S Cannon, V. L. Snoeyink, R. G. Lee and G. Dagois, 1997, "The Effect of Iron and Sulfur on Thermal Regeneration of GAC", Journal of the American Water Works Association, 89, (II), pp. 111-122
  • K. O. Nowack and Fred S Cannon, 1997, "Control of Calcium Build up in GAC: Effect of Iron Coag-ulation", Carbon, 35, (9), pp. 1223-1237
  • K. J. Karthikeyan, H. A. Elliott and Fred S Cannon, 1997, "Adsorption and Coprecipitation of Copper with the Hydrous Oxides of Iron and Aluminum", Envir. Sci. Tech., 31, (10), pp. 2721-2725
  • J. Dusenbury and Fred S Cannon, 1996, "Advanced Oxident Regeneration Pertaining to Granular Activated Carbon Beds for Air Pollution Control", Carbon, 34, (12), pp. 1577-1589
  • N. E. Krupa and Fred S Cannon, 1996, "GAC: Pore Structure Versus Dye Adsorption", Journal American Water Works Association, 88, (6), pp. 94-108
  • F. R. Brant and Fred S Cannon, 1996, "Aqueous-Based Cleaning with Hydrogen Peroxide", Environmental Health and Science, A31, (9), pp. 2409-2434
  • Fred S Cannon, J. S. Dusenbury, P. D. Paulsen, J. Singh, D. W. Mazyck and D. J. Mauer, 1996, "Advanced Oxidant Regeneration of Granular Activated Carbon for Controlling Air-phase VOCs", Ozone Sci., and Engr., 18, pp. 417-441
  • Fred S Cannon, V. L. Snoeyink, R. G. Lee and G. Dagois, 1995, "Reaction Mechanism of Calcium-Catalyzed Thermal Regeneration of Spent Granular Activated Carbon", Carbon, 32, (7), pp. 1285-1301
  • Fred S Cannon, V. L. Snoeyink, R. G. Lee, G. Dagois and J. DeWolfe, 1993, "The Effect of Calcium in Field-Spent Granular Activated Carbons on Pore Development During Regeneration", J. American Water Works Assoc., 85, (3), pp. 76-89
  • Fred S Cannon, 1991, "Discussion of Simplified Design of Biofilm Processes using Normalized Loading Curves, by M. S. Heath, S. A. Wirtel, and B. E. Rittmann", Research Journal Water Pollution Control Federation, 63, (1), pp. 90
  • Fred S Cannon and P. V. Roberts, 1982, "Activated Carbon: Adsorption of DOC from Wastewater", Journal of the Environmental Engineering Division, (EE4), pp. 766-783
  • Fred S Cannon, Hao Sun, Xin He, Yongtian Wang, Hong Wen and Xiaobing Li, , "NHO3-Surfactant Modified Activated Carbon to Remove Cd(II)", Water Science and Technology
  • Fred S Cannon, Chen Yuan and Zhiwei Zhao, , "Removing nitrate with coconut activated carbon, tailored with quaternary ammonium epoxide compounds: Effect of base or acid carbon pretreatment.", 234, pp. pp. 21-27
  • Joshua F. Allen, Fred S Cannon, John T. Fox, Cesar Nieto-Delgado, Robert C Voigt, James Lamonski and John D. Kirby, , "Full-Scale Air Emissions Monitoring and Casting Quality Demonstration of a Hybrid Hydrolyzed Collagen-Alkali Silicate Core Binder", International Journal Metalcasting, 10, (2), pp. pp.172-189
  • Fred S Cannon, Dane J. Kelsey, Cesar Nieto-eDelgado and Rachel A Brennan, , "Organic NEEM compounds inhibit soft-rot fungal growth and improve the strength of anthracite bricks bound with collagen and lignin for use in iron foundry cupolas.", Journal of Applied Microbiology, 119, (ISSN 1364-5072)

Conference Proceedings

  • A. M. Redding, Fred S Cannon, S. A. Snyder and B. J. Vanderford, 2009, "Quantitative Structural Analysis Relationship of the adsorption of endocrine disrupting compounds, pharmaceuticals, and personal care products on modified activated carbons", Proceedings, American Water Works Association National Conference, pp. 4
  • J. Patterson, Fred S Cannon and R. Parette, 2009, "Effect of Thiosulfate on Perchlorate Adsorption onto Surfactant-tailored activated carbons", Proceedings, American Water Works Association National Conference, pp. 4
  • R. Parette, Fred S Cannon and W. Sheehan, 2009, "Arsenic Removal by Iron-Tailored Activated Carbon in Pilot Columns", Proceedings, American Water Works Association National Conference, pp. 4
  • W. F. Chen, Fred S Cannon and J. Y. Zou, 2007, "Arsenic Removal by iron-preloaded GAC coupled with zero valent iron", International Carbon Society, pp. 4
  • Y. J. Wang and Fred S Cannon, 2007, "Emissions monitored by TGA-MS from coals and cellulose, for Foundry Conditions", International Carbon Society, pp. 4
  • H. Huang, Fred S Cannon and Y. J. Wang, 2007, "In-situ Pyrolyzed Activated Carbon from Coals for Foundry Applications", International Carbon Society, pp. 4
  • J. Patterson, Fred S Cannon and R. Parette, 2007, "Surfactant-Tailored Activated Carbon for Perchlorate Removal", International Carbon Society, pp. 4
  • M. Jang and Fred S Cannon, 2007, "Hydros ferric oxide tailored activated carbon for arsenic removal", International Carbon Society, pp. 4

Research Projects

  • July 2016 - June 2019, "The Pennsylvania State University Sloan Minority PH.D. University Center for Exemplary Mentoring," (Sponsor: Alfred P. Sloan Foundation).
  • April 1999 - July 2016, "Sloan Foundation Partnership University Center for Exemplary," (Sponsor: The Sloan Foundation).
  • January 2011 - December 2015, "A Novel Foundry Fuel Source Utilizing Biomass Co-Products as Binders and Fuel," (Sponsor: USDA National Institute of Food and Agriculture).

Honors and Awards

  • Way Pavers Award, The Pennsylvania State University, Council of College of Multicultural Leadership, April 2016

Service

Service to Penn State:

  • Committee Work, Committee Member, Promotion and Tenure Committee for College of Engineering, College of Engineering, Promotion and Tenure Committee, September 2017 - June 2018
  • Contribution to Programs to Enhance Equal Opportunity/Cultural Diversity, Chairperson, April 2016

Service to External Organizations:

  • Organizing Conferences and Service on Conference Committees, Co-Organizer, Industry Sponsorships and Exhibits, Graduate Student Presentations competition, The International Carbon Society, January 2016 - July 2016
 


 

About

The Penn State Civil and Environmental Engineering Department, established in 1881, is internationally recognized for excellence in the preparation of undergraduate and graduate engineers through the integration of education, research, and leadership.

Department of Civil & Environmental Engineering

212 Sackett Building

The Pennsylvania State University

University Park, PA 16802-1408

Phone: 814-863-3084